ATTENTION:
BEFORE YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COST N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR
YOU CAN CALL: 08068231953, 08137701720
WHATSAPP US ON: 08137701720
Comparative Analysis of Strength and Physical Properties of
Concrete Made from Three Different Coarse Aggregate (Granite, Gravel and Palm Kernel)
Abstract
The study is aimed at examining the comparative analysis of the strength and physical properties of concrete made from three different coarse aggregates. The research present the result and findings of an experimental research of the strength and physical properties of concrete made from different aggregates such as sharp sand, granite, gravel, palm kernel shell. In this research, sieve analysis and compressive test were carried out using a 150mm×150mm×150mm mould and a mix ratio of 1:2:4 by weight of concrete and water cement ratio of 0.5 was adopted, 36 cubes were produced and all the samples were cured in fresh water. The concrete cubes were tested for compressive strength at 7, 14, 21 and 28 days. The result obtained from the compressive strength shows that the different coarse aggregate used, possess different compressive strength value. The mean strength in N/mm2 of concrete cubes cast with palm kernel at 7, 14,21and 28days gave 3.64N/mm2, 3.82N/mm2 4.00N/mm2and 4.22N/mm2respectively while concrete made of gravel gave strength of 12.53 N/mm2, 12.98 N/mm2, 13.33 N/mm2, 16.67 N/mm2, For concrete made of granite, the strength are 14.53 N/mm2, 15.56 N/mm2, 18.67 N/mm2 and 20.44 N/mm2respectively. This concludes from the above listed result that, the compressive strength of concrete made from granite gave higher compressive strength value of 20.44 N/mm2, at 28days as compared to the compressive strength of concrete made of gravel and palm kernel shell which gave a compressive strength value of 16.67 N/mm2 and 4.0N/mm2respectively.Specifications of the intended works predetermines materials which are suitable for construction, it is therefore evident to ascertain the strength of these material before execution of intended project.
HOW TO RECEIVE PROJECT MATERICAL(S)
After paying the appropriate amount (#5,000) into our bank Account below, send the following information to
08068231953 or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR MORE INFORMATION, CALL:
08068231953 or 08168759420
http://graduateprojects.com.ng/